RAYCO-WYLIE
Rayco-Wylie Systems is the trusted reference for over 70 years. They are there when you need them with world class crane monitoring systems, products, and services to maximize your crane operations. Regardless of crane make or model, lattice, hydraulic, boom truck or special application, Rayco-Wylie Systems has the expertise to provide a solution for the specific application.
W1250
|
W1250
The Wylie W1250 Load moment indicator is a length, load, angle, radius, and lifting capacity and anti-two-block indicator. A display in the cab or near the operator will give the operator all the necessary information to prevent from guessing when using his crane. The system can also be set with limits by the operator to warn the operator of an accidental maneuver into an unwanted area. |
W1258
|
W1258
The Wylie W1258 is a Load Moment System designed to function as an operator's aid. The system has sensors installed in specific locations on the crane to monitor boom angle, boom length, cylinder pressures and anti-two-block condition. The system uses this information to calculate the hook load and radius, determine the crane's current rated capacity, and to check for an overload condition. When set-up and used in accordance with the manufacturer's instructions, the system will warn the operator of any approach to the overload, or two-block occurrences (when equipped with an anti-two-block warning system.) |
I4500
|
I4500
The I4500 is a computerized crane monitoring system, designed as an operator aid. It comprises sensors fitted to the crane and a display located in the cabin of the crane. This version measures the boom cylinder pressure, the boom angle and length, and it indicates safe or critical conditions, while performing and authorized lift of loads. optional sensors may also be fitted to monitor the slew angle and the rotation of the hoist drum to provide some extra information to the operator. |
I4000
|
I4000
The I4000 Multifunction indicator is a computerized system designed to provide the operator with the necessary information to operate the crane safely, and within the nominal load limit authorized by the crane manufacturer. The indicator works by indicating to the operator the load applied to the crane so the he may compare this load with the nominal load authorized for each lifting position |
I3500
|
I3500
|
I3000
|
|
Downloads
|
